AAM Competition UpRev Maxima Pro Tuning (Gen7)

995.00 995.0 USD 995.00


  • UpRev Pro Tuning
  • Tuning Method

This combination does not exist.

 In Stock - ready to ship!

AAM Competition Nissan Maxima Tuning - UpRev Engine Management Software

ECM tuning is necessary to bring out the most out of your basic bolt ons, or required when going forced induction. Depending on the application, the tune itself can net as much power as all your bolt ons combined (basic N/A bolt ons). The flat rate of $895 includes a full remote/street tuning session, as well as the UpRev Flash license.  We have several options which include standard tuning, standard tuning + the UpRev ARC options, and Forced Induction Tuning (which includes the ARC options).  As well as tuning on our in-house dyno for those who can travel to AAM Competition for their tuning session.

A properly tuned vehicle is key to top performance.  The factory ECU (computer) on the Maxima is very conservative, and overly rich.  Nissan left a lot of power on the table.  On a stock Nissan Maxima, gains of 15-20 horsepower and torque are common with the AAM Competition Nissan Maxima Tuning package.  Increased gains can be seen on modified Maxima's where gains of 15 to 35 horsepower are common.

Experience more power, greater efficiency, better drivability, and simply more fun.  The AAM Competition Nissan Maxima UpRev Tuning Package is the most easy way to unleash the potential of the VQ engine in the Nissan Maxima.

Flashing (commonly also called programming) the factory Maxima ECU only takes two minutes.  Making this the quickest, easiest power upgrade for your Z.

Exclusive Benefits

  • More hp - gain 15 to 20 horsepower
  • More torque - gain 15 to 20 lbs. torque
  • Improved throttle response

  • Improved drivability

  • More efficiency - optimized timing and fuel


  • Easy installation - less than a few minutes
  • Up to 5 Maps on cruise control equipped vehicles

  • Requires laptop computer (easy program download that allows quick communication with your vehicle)

Key Tuning Improvements

AAM Competition Tuning Includes

Optimized Fueling Maps

The fueling maps and afr targets are optimized for greater efficiency, and greater power.  Offering the best of both worlds - improved fuel consumption as well as maximized horsepower and torque.

Optimized Timing Maps

The timing maps are optimized for maximum power and efficiency.  Offering a cleaner running engine that also produces more horsepower and torque.

Cam Phasing

The cam phasing is optimized for equipped vehicles, offering precision operation for best power.

Rev & Speed Limiter

The rev and speed limiter are modified for higher rpm and speed capabilities.  We can also add a speed limiter for those who would like to limit the maximum speed of their vehicle.


The DTC's can be adjusted as needed to compensate for different aftermarket upgrades that require this feature.


Optional "Burble" map can be added to add that "sexy" deceleration sound.  This option can be added at no additional cost when requested.  For best results / most amount of burble, a free flowing exhaust system is needed.

Electronic Throttle Control

The throttle maps are optimized to achieve wide open throttle at all speeds and increase the driving experience through improved logic.

ARC (Advanced Racing Control) Option:

ARC Rolling Anti-Lag

This feature makes it possible for more controlled rolling launches and building boost for roll racing. Rolling Anti-lag Vehicle Speed Activation, this is the speed you must reach in order for this feature to activate, the base Pro Tuning ROM comes set with 18 MPH, which means you must be over 18 MPH to use this feature. There is also a Rolling Anti-lag Minimum RPM, the base Pro Tuning ROM is set to 3000 RPM, thus the feature can only be activated if your engine speed is at least 3000 RPM - this is adjustable as well. In order to activate Rolling Anti-lag you must meet the minimum throttle activation requirement, which means you must be about 1/2 throttle for the feature to activate - we may adjust this value as well according to preference. To activate Rolling Anti-lag be sure all the above requirements are met, then hold down the Cancel cruise button once you get to the desired vehicle speed for your roll, release the Cancel button when you want to go. 

Burn-Out Mod

Turning this feature ON results in the brake-throttle safety limiter being ignored. This will allow the throttle to open fully while pressing the brake pedal at the same time so that you can begin doing a burnout. 

Tuner Tip:  Each ARC feature is governed by a minimum and maximum oil temperature, which means that the features won't activate until your oil temperature gets into this range. We are able to adjust the minimum and maximum to your liking. The base ROM will come with default temps of 120 F and 250 F, so for the ARC features to work, your oil temp must be within that range.

Purchasing Note:  AAM Competition UpRev Pro Tuning is non-refundable and non-returnable.  A significant amount of time and effort goes into each purchase.  When you purchase tuning please keep in mind that you are purchasing a block of time where we will troublshoot and/or make adjustments to your vehicle.  If you miss your appointment you are not entitled to a refund, but you may reschedule for a different time. 

How Remote Tuning Works:  AAM Competition UpRev Pro Tuning is a straight forward process.  A laptop is required to complete the tuning process.  We will send you an interface cable that connects your vehicle to your laptop.  A easy download of the UpRev ROM Editor Software (free download) to your laptop computer is step number 1.  Once installed, you will connect one side of the cable to your vehicle and the other side of the cable to your computers USB port.  The vehicle connector is very easy to get to, it is located right underneath the steering wheel.  Once the Rom Editor program is opened, it will automatically detect the cable and detect your vehicles ECU code.  Email your vehicle's ECU code along with a full list of your vehicles upgrades (please feel free to submit your ecu code and list of upgrades using the form below).  Once received, we will send (typically within one day- but it can take as long as 3 or 4 days) you a file that is your vehicles new Pro Tuning File.  You copy this file from your email to your laptop.  Then re-connect your laptop to your vehicle via the interface cable.  Once connected the entire process of flashing (programming) your Pro Tuning File to your vehicle takes less than 2 minutes!  In 99% of the cases (simple bolt ons) this tune will be 100% perfect and this is the final step.  Those who have more upgrades done to their vehicle outside of simple/popular bolt ons we offer (at no additional charge to the remote tuning option selected above with this purchase) up to 6 revisions to your Pro Tuning rom file during this purchases remote tuning session.  These revisions are achieved through datalogs.  We will send you a list of parameters to datalog and then you email the datalog back to us, so that we can analyze your vehicles performance, and make adjustments (remotely tune your vehicle).  In the rare case more than 6 revisions are needed, we can offer additional additional revisions and support for $50/revison.


UpRev Pro Tuning UpRev Pro Tuning - NA or UpRev Pro Tuning - NA ARC or UpRev Pro Tuning - Forced Induction
Tuning Method Remote/Street Tuning or Dyno Tuning Tuning (at AAM Competition)

To install this Web App in your iPhone/iPad press and then Add to Home Screen.